Where Halloween Lives Beyond October

How To Make A Cute Spider Halloween Trick-Or-Treat Bag

Spider Boo Bag

Spider Halloween Trick-or-Treat Bag

As an Amazon Associate I earn from qualifying purchases.
This post may contain affiliate links for your convenience. Click here to read our disclosure policy.

One of my favorite Halloween decorating methods involves webbing – lots and lots of webbing.

Spreading webs across our front porch is my quick and easy way to up the spooky factor and give little tots pause before they venture underneath them to retrieve a treat.

Halloween Haunted House Spider Webbing

The webs are ominous enough for most littles, so much so that I can get by with only a couple of spiders or forgo them altogether. 

But who puts out webs without spiders? 

Not I. I always make sure to perch our largest specimen on a bush. There, he is more easily seen upon exit, causing many kiddos to veer wide around him while others stop to pet him.

If you have a fan of the eight-legged beastie on your Halloween list, this project is for you.

This boo bag is our second in a series of trick-or-treat sacks and features a not-too-scary spider – the perfect companion for Halloween candy acquisition.

A Material Minute

Before we begin, here are a few quick notes about the materials for this project.

The material list calls for a 2 mm craft felt. This is thicker than standard craft felt sheets, making your trick-or-treat sack more sturdy.

Since this material is thicker it may require a bit more patience when machine sewing.

To add even more durability to your bag, you can cut a piece of heavy cardstock or thin cardboard and place it in the bottom.

I list specific colors for the trick-or-treat sack, but feel free to experiment with your spider, such as substituting googly eyes for felt eyes or swapping out the black felt for a fun color.

Lastly, this project can be machine or hand-stitched. While hand sewing will take a bit longer, it may be easier than navigating a sewing machine into tight spaces of bulky felt. 

Ok, let’s get started.

Let’s Make A Trick-Or-Treat Bag

For this project, we will need:
4 sheets of 9″ x 12″ 2mm craft felt in black
1 sheet of 9″ x 12″ 2mm craft felt in grey
Scrap piece of white or ivory craft felt
Scrap piece of black craft felt
16-17″ piece of belting trim
Scissors or cutting machine with fabric blade – I use the Cricut Maker
Adhesive – I like Beacon Felt Glue
Sewing machine and thread
Straight pins or clips (not shown)

Spider Trick or Treat Boo Bag Supplies

We will also need the Spider Boo Bag template from the Haunted Library. Choose the PDF file to hand cut or the SVG file for machine cutting.

Haunted Library Banner

Spinning The Web

To begin, if machine cutting, upload the Boo Bag template into your design software, such as Cricut Design Space.

Spider Boo Bag CDS

To cut by hand, open the PDF template using your favorite PDF reader (Adobe, FoxIt, etc.).

Print your template, ensuring the pages are set to print at Actual Size. The base piece will exceed the print area, so select the Poster option under Page & Size Handling.

Spider Boo Bag PDF SS
Spider Boo Bag PDF Print

Cut two of the spider base, two sides, and one bottom from the black 2mm felt.

Cut two of the spider legs pieces from the gray craft felt.

Cut the eyeball pieces from the white craft felt and the pupils from the black.

She’s Got Legs

To assemble, glue or stitch each eyeball together by placing the black circle onto the white circle.

Glue the eyeballs onto the front (base piece) of the spider.

Glue Eyeballs & Pupils
Glue Eyes Onto Spider

Next, position the spider legs along the front base piece the side and glue them into place.

Glue Spider Legs Onto Trick or Treat Sack

Assembling An Arachnid

To assemble, stack the front onto the bottom and stitch together using a 1/4″ seam allowance. (The seam will be to the outside.)

Stack Front Onto Bottom
Stitch Front To Bottom
Front & Bottom Attached

Next, stack the back onto the bottom and stitch together.

Stack Back & Bottom
Bottom with Front & Back of Trick or Treat Bag

Mark the center of the bottom and one side and align the pieces.

When the centers are aligned, there will be 1/4″ of felt on each side that overhangs the bottom seams.

Locate Centers
Pin Side To Bottom

Stitch the side and bottom pieces together, beginning at the seam and leaving the 1/4″ overhang at both ends.

Stitch Bottom To Side From Ditch to Ditch

Demo shown on a grey felt to make it easier to see.

When the side is attached to the bottom, it should look like this:

Close Up of Side & Bottom
Side Attached

Repeat for the opposite side.

Both Sides Attached

Pin or clip the side piece to the front and stitch from the bottom to the top. 

Clip Side To Front
Front Stitched To Side

Next, clip the side piece to the back and stitch from the bottom to the top.

Repeat for the opposite side.

Sides Attached

How To Handle Your Spider

Lastly, prepare the handle by trimming the ends of the belting trim and carefully heating them to avoid fraying.

Heat Handle Ends

Pin the belting to the center of each side of the bag.

Pin Handles To Bag

Stitch down, across, up, and over to form a square, then reinforce the union by stitching an “X” in the center.

Repeat this two to three times to ensure the handle is well attached.

Stitch Belting Handle To Sides

Demo shown on a grey felt to make it easier to see.

Cute Creepy Crawlie

This trick-or-treat bag is ready for Halloween!

Spider Trick or Treat Bag
Spider Boo Bag
Spider Trick or Treat Bag
Spider & Mummy Boo Bags

This bag is the second creation from our ghoulish group of trick-or-treating sacks.

Check back to see which character is up next, and, in the meantime, check out the Mummy Boo Bag.

Until next time – stay spooky.

Free templates & patterns

130+ freebies are waiting in the Haunted Library

Templates, patterns and printables for every project on the blog.

Marsha
Your haunted host

Marsha

Counting down to Halloween since the 1970s. I create, style and celebrate all things costume and Halloween, all year round.

You May Also Like
About Me
Marsha

Hi, I’m Marsha

Welcome to my world of Halloween Ever After, where I create, style, and celebrate all things costume and Halloween.

Find Something Fun
Affiliate Disclosure

Within these haunted pages lie affiliate links to curious and captivating finds I love. If you make a purchase through them, I may earn a modest commission (think fun-size candy bar), which helps keep the Halloween magic alive. No extra cost to you – cross my batty heart.

Bearly Art Precision Craft Glue
A Making Make Believe favorite!
Buy Now
Bride and Groom Yarn Ghosts

I Do!

A Ghostly DIY

Make Me!

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Black vodka martini on a Halloween party tablescape

It's Official!

We're Haunt Friends

Check your email for the Haunted Library password.

 

Don’t miss a moment of the mischief.

Add hello@halloweeneverafter.com to your address book.

The magic happens right here in my studio and office. When you step inside my creative space, you’ll find an ever expanding gallery wall overflowing with original spooky art and classic Halloween LPs, right alongside a haunted cabinet packed to the brim with vintage curiosities.

It’s under the watchful eyes of these retro treasures that I design and craft.

We Have Room

For One More

Join us and get access to our Haunted Library stocked with templates, printables, cut files, and exclusive content. Plus, you’ll receive Eerie Emails just for our subscribers.

*Stay as long as you like. Unsubscribe at any time.