Where Halloween Lives Beyond October

How to Make Halloween Ornaments For Your Haunted House

The All Hallows' Curio Collection felt Halloween ornaments
The All Hallows’ Curio Collection felt Halloween ornaments

Hello, August!

In my haunted house, this month marks the unofficial kickoff of the spooky season. Evan as the sweltering late-summer days begin their slow transformation toward autumn, I know we aren’t completely out of the heatwave woods just yet. But I can finally see that soft, shadowy light at the end of the tunnel.

These turning pages of the calendar always stir up my favorite kind of anticipation – long evenings made for cozy crafting, comfort foods, and curling up under a throw with a good ghost story.

Autumn is the ultimate season for slow, comforting creative pursuits. While my summertime stitching took a back seat to outdoor activities, I am so ready to trade sunny porch time for a stove brimming with spiced aromas, a classic spooky film on the screen, and needle and thread in hand.

Cozy Autumn

To celebrate the season stirring, I’m thrilled to introduce The All Hallows’ Curio Collection – our brand new 6-piece Halloween ornament pattern! Featuring a nostalgic crew of six classic spooks – a friendly ghost, fluttering bat, startled jack-o’-lantern, sly black cat, wise old owl, and delicate spider web – this versatile pattern set is designed for slow, mindful making. Whether you prefer to stitch them up in soft felt, colorful cotton fabrics, or cut them from vintage-inspired cardstock, these little icons are ready to haunt your autumn home.

Amassing Materials for DIY Halloween Ornaments

A Quick Raid of the Creepy Craft Cabinet

For this project, we will need a cutting machine or scissors plus:

Version I – Felt
Craft or wool felt in assorted colors
Black craft felt for backing
Iron-on adhesive such as Pellon 805 Wonder-Under
Iron and ironing mat
Ribbon, thin cording, yarn, or similar (for loop hanger)
Embroidery floss and needle (optional for embellishment)

Version II – Fabric
Cotton fabric in assorted colors – I’m using the Riley Blake Costume Maker’s Act II 5 Inch Stacker Charm pack
Black stiffened felt for backing
Iron-on adhesive such as Pellon 805 Wonder-Under
Iron and ironing mat
Ribbon, thin cording, yarn, or similar (for loop hanger)
Embroidery floss and needle (optional for embellishment)

Version III – Scrapbook Paper & Cardstock
Scrapbook paper or cardstock in assorted colors – I’m using the Paper Studios Jeepers Creepers collection
Black cardstock for backing
Adhesive – I’m using Uhu Glue Stick
Ribbon, thin cording, yarn, or similar (for loop hanger)
Fine-point black marker (optional for embellishment)

All Hallows Curio Halloween ornament collection supplies

We will also need the The All Hallows’ Curio Collection from the Hauntingly Yours Shop. This collection includes the templates for six Halloween ornaments of familiar spooky icons: cat, bat, spider web, ghost, Jack o’lantern, and owl. Your download includes SVG files for machine cutting and PDF files for cutting by hand as well as a Placement Guide for easy assembly.

Haunted Library Key Animated

Cut It Out

Pick Your Poison

Whether you prefer to cut your ornaments with a cutting machine like a Cricut or with scissors, we’ve got you covered.

For hand cutting, download the PDF, print and cut out the templates, and trace them onto felt, fabric, or scrapbook paper/cardstock. Follow instructions below specific to your material and then cut the pieces by hand.

All Hallows Curio Halloween ornament PDF

For machine cutting, upload the SVG into your favorite design software, such as Cricut Design Space, and see the recommended mats, blades, and cut settings for each version below.

Note that the settings listed are what I used; I encourage you to experiment or use the settings you’ve had success with in the past.

Version I – Felt Halloween Ornaments

Fiercely Fused

Begin by setting your iron to medium heat with no steam, and cut a piece of Pellon 805 Wonder-Under the size of your felt square.

Wonder-Under cut to felt size

Place the adhesive (rough) side of the Wonder-Under down onto the backside of your felt and press for a few seconds.

If you are using acrylic craft felt instead of wool felt, it is best to keep the iron moving in a circular motion to prevent the felt from melting. Do this gently so you don’t stretch the felt fibers.

Iron Wonder-under onto felt square

Leave the backing paper on and allow the piece to cool.

Repeat this process for each felt color, except the black felt backing piece.

Wicked Precision Cutting

Remove the paper backing from each piece of felt. We’re going to need the paper backing again later but if you accidentally rip or misplace it, grab some parchment paper.

Remove paper backing from Wonder-Under

Cut the elements for each Halloween ornament from the felt using the FabricGrip Mat, a Rotary Blade, and the Cricut Felt, Acrylic Fabric setting. I also like to set the pressure level to More.

Place the felt right side up, Wonder-Under side down, and ensure it is firmly stuck to the mat.

Felt ornament pieces cut out

Bewitchingly Bonded

Using the included Placement Guide found in your download, adhere the pieces to the base in the order specified.

Placement guide for Halloween ornaments assembly

Remember that piece of backing paper I mentioned to keep ahold of earlier? Slip it or a piece of parchment paper under the ornament to protect your ironing mat. I also like to place a piece of parchment paper on top of the pieces before ironing to protect the surface of the felt.

Top felt pieces with parchment and iron to fuse

Place the first element onto the ornament base and press it firmly into place.

Repeat with the remaining elements.

Felt pieces fused together

Enchanting Embellishments

Spirited Stitches

If desired, accent the interior elements using a small straight stitch and the exterior with a blanket stitch.

For the bat, straight stitch to emphasize wings and for the web, straight stitch spider webbing.

Straight stitch layers to embellish
Blanket stitch around exterior to embellish

Mesmerizing Meow

To make the whiskers for the cat, cut 4 5” strands of embroidery floss. Even up the strands, fold them in half, and then stitch the strands onto the cat next to the nose.

Repeat for the other side.

Back It Up

Spine-Chillingly Secured

Form a hanger by fashioning a loop from ribbon, thin cording, or yarn. Slip the loop between the front layer and back layers near the top center of the Halloween ornament.

Add ribbon hanging loop

Iron the black felt backing onto the ornament.

Backing attached

Version II – Fabric Halloween Ornaments

Eerily Integrated

Begin by setting your iron to medium heat with no steam, and cut a square of Pellon 805 Wonder-Under the size of your fabric square.

Cut 805 Wonder Under to fabric size

Place the adhesive (rough) side of the Wonder-Under down onto the backside of your fabric and press down firmly for 5-8 seconds.

Iron Wonder Under onto fabric square

Leave the backing paper on and allow the piece to cool.

Repeat this process for each fabric pattern, except the black stiffened felt backing piece.

Cunningly Clipped

Remove the paper backing from each piece of fabric. We’re going to need the paper backing again later but if you accidentally rip or misplace it, grab some parchment paper.

Remove paper backing from Wonder Under

Cut the elements for each Halloween ornament from the fabric using the FabricGrip Mat, a Rotary Blade, and the Cotton, Bonded setting. Place your fabric right (pretty) side up and use the Default pressure setting.

Fabric ornament pieces cut out

Shockingly Secured

Using the included Placement Guide found in your download, adhere the pieces to the base in the order specified.

Placement guide for Halloween ornaments assembly

Remember that piece of backing paper I mentioned to keep ahold of earlier? Slip it or a piece of parchment paper under the ornament to protect your ironing mat. I also like to place a piece of parchment paper on top of the pieces before ironing to protect my iron from any sticky residue.

Top fabric pieces with parchment and iron to fuse

Place the first element onto the ornament base and press it firmly into place.

Repeat with the remaining elements.

Fabric pieces fused together

Awe-inspiring Adornment

To-Die-For Details

If desired, make small straight stitches around the interior elements and along the outside edge of the ornament.

For the bat, straight stitch to emphasize wings and for the web, straight stitch spider webbing.

Straight stitch layers to embellish

Whimsical Whiskers

To make the whiskers for the cat, cut 4 5” strands of embroidery floss. Even up the strands, fold them in half, and then stitch the strands onto the cat next to the nose.

Repeat for the other side.

FaBOOless Finishing

Frightfully Fastened

Form a hanger by fashioning a loop from ribbon, thin cording, or yarn. Slip the loop between the front layer and back layers near the top center of the Halloween ornament.

Add ribbon hanging loop

Iron the black stiffened felt backing onto the ornament.

Backing attached

Version III – Scrapbook Paper & Cardstock Halloween Ornaments

Sinister Snipping

Cut the elements for each Halloween ornament from scrapbook paper or cardstock using the Standard Grip mat, Fine Point Blade, and the settings that match the cardstock weight (light, medium, or heavy).

Paper ornament pieces cut out

Ghastly Glued

Using the included Placement Guide found in your download, spread adhesive onto the back of each element and glue the pieces to the base in the order specified.

For best adhesion, make sure to get along the edges of each piece.

Glue elements into place

Lastly, form a hanger by fashioning a loop from ribbon, thin cording, or yarn. Slip the loop between the front layer and back layers near the top center of the Halloween ornament.

Add ribbon hanging loop

Glue the cardstock backing onto the ornament.

Loop in place

Fearsome Features

If desired, outline the interior elements with a black fine-point marker.

For the cat, draw several straight lines from the nose to the edge of the face to form the whiskers.

Draw a “stitched” line to emphasize the bat wings and to create the spider webbing.

Outline elements with fine tip markers
Draw stitch line with fine tip marker

Bump In The Night Banner

Otherworldly Option

For another spellbinding display, attach the ornaments to a length of ribbon to create a banner. Tuck the loop hanger to the back (or omit altogether), then clip each Halloween icon onto the ribbon using loop pins, mini wooden clips, or mini bulldog clips.

The All Hallows' Curio Collection banner

Last Looks

Boo-tiful Baubles

Now your ornaments are ready to haunt your house in handmade style!

Ghost from Making Make Believe The All Hallows Curio Collection
Bat from Making Make Believe The All Hallows Curio Collection
Jack O'Lantern from Making Make Believe The All Hallows Curio Collection
Cat from Making Make Believe The All Hallows Curio Collection
Owl from Making Make Believe The All Hallows Curio Collection
Spider Web from Making Make Believe The All Hallows Curio Collection

Don’t forget to visit the Hauntingly Yours Shop to grab your the All Hallows’ Curio Collection. I can’t wait to see the Halloween ornaments you create!

Until next time – stay spooky.

Free templates & patterns

130+ freebies are waiting in the Haunted Library

Templates, patterns and printables for every project on the blog.

Marsha
Your haunted host

Marsha

Counting down to Halloween since the 1970s. I create, style and celebrate all things costume and Halloween, all year round.

You May Also Like
About Me
Marsha

Hi, I’m Marsha

Welcome to my world of Halloween Ever After, where I create, style, and celebrate all things costume and Halloween.

Find Something Fun
Affiliate Disclosure

Within these haunted pages lie affiliate links to curious and captivating finds I love. If you make a purchase through them, I may earn a modest commission (think fun-size candy bar), which helps keep the Halloween magic alive. No extra cost to you – cross my batty heart.

Bearly Art Precision Craft Glue
A Making Make Believe favorite!
Buy Now
Bride and Groom Yarn Ghosts

I Do!

A Ghostly DIY

Make Me!

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Black vodka martini on a Halloween party tablescape

It's Official!

We're Haunt Friends

Check your email for the Haunted Library password.

 

Don’t miss a moment of the mischief.

Add hello@halloweeneverafter.com to your address book.

The magic happens right here in my studio and office. When you step inside my creative space, you’ll find an ever expanding gallery wall overflowing with original spooky art and classic Halloween LPs, right alongside a haunted cabinet packed to the brim with vintage curiosities.

It’s under the watchful eyes of these retro treasures that I design and craft.

We Have Room

For One More

Join us and get access to our Haunted Library stocked with templates, printables, cut files, and exclusive content. Plus, you’ll receive Eerie Emails just for our subscribers.

*Stay as long as you like. Unsubscribe at any time.