Where Halloween Lives Beyond October

How to Make Your Own Vintage Inspired Jointed Scaredy Cat

Vintage Inspired Jointed Scaredy Cat
Vintage Inspired Jointed Scaredy Cat

Shadows, Luck, & Folklore

One of the ultimate icons of Halloween has to be the classic black cat. More often than not, they’re depicted in a downright foul mood: one paw raised in the air – ready to claw anyone who dares get too close – a hair-raising arched back, a towering tail, and a face locked in a permanent snarl and hiss.

We have several of these vintage die-cut scaredy cats lurking in our collection, and I swear I can almost hear their yowls echoing through the glass of their display frames.

Vintage Jointed Scaredy Cats

But how did black cats become such an unmistakable symbol of All Hallows’ Eve?

It really depends on where – and when – you look. Ancient Egyptians revered black cats as divine protectors, and in Japan, they were welcomed as bearers of good fortune. But over in Medieval France, Spain, and Germany, rumors took over, and black cats were bound to tales of witchcraft, curses, and dark magic. When those old-world superstitions crossed the Atlantic, the spooky connection stuck. They quickly clawed their way into American Halloween folklore, cementing their status as the ultimate All Hallows’ Eve mascot and they have been a staple of vintage holiday decor ever since!

Inspired by these spooky, spitting classics, I set out to capture that golden-era magic with a new DIY project. Today, I’m sharing a step-by-step tutorial so you can assemble your very own classic-inspired jointed cat decoration. Grab the ready-to-cut pattern in our Hauntingly Yours Shop, download the files, and start bringing this fierce feline to life.

If vintage is your Halloween vibe, pull up a chair, grab your glue, and let’s bring a little yesteryear magic to life.

Amassing Materials for A Jointed Scaredy Cat

A Quick Raid of the Creepy Craft Cabinet

For this project, we will need:

Sturdy 12” x 12” cardstock in three colors; I’m using black, orange, and taupe
Cutting machine or scissors/finger blade
Adhesive such as a glue stick
Brads or grommets with a grommet tool

Vintage Inspired Scaredy Cat supplies

We will also need the Scaredy Cat files available in our Hauntingly Yours Shop. The zip file includes both the PDF for hand cutting and the SVG for machine cutting.

Haunted Library Key Animated

Spirited Scissors – Cutting By Hand

Unearth the Template

If using the PDF Printable to cut by hand, open the Scaredy Cat PDF in your favorite reader (Adobe, Foxit, etc.), and print the odd numbered pages elements at Actual Size.

Print odd numbered pages at actual size

Next, print the even numbered pages using the Poster option. Once printed, piece the pattern together.

Print even numbered pages using Poster for page size

Cut out all the pattern pieces, transfer them onto your cardstock, and cut them out using scissors or a finger blade.

Jointed Scaredy Cat pieces

Eerily Equipped – Machine Cutting

Claim Your Files From The Crypt

After downloading the Scaredy Cat files from the Hauntingly Yours Shop, upload them to your favorite design software. I’m using Cricut Design Space.

The Scaredy Cat is designed to be 10.32” x 11.5”. Double-check the sizing and, if needed, resize while keeping all pieces grouped together.

Check sizing of Scaredy Cat SVG

Arrange your pieces onto the cardstock. Design Space might break up same-color pieces onto multiple sheets, but you can fit all elements of each color onto one 12×12 sheet.

Cricut cutting machine layout for Scaredy Cat

Cut out the pieces.

Jointed Scaredy Cat pieces

Glue Like A Ghoul

Fierce Face-Forward

Beginning with the front section, apply a layer of glue to the back of the orange layer.

Add glue to back of orange front section

Aligning the hole and the edges, adhere the orange/middle layer on top of the taupe/bottom layer.

Align orange front section onto taupe and stick into place

Next, glue the black paws layer onto the orange, aligning the holes. The black/top layer is slightly smaller leaving the orange to form an outline along the edges.

Glue black front section paws onto orange layer

Lastly, center the black cat face onto the orange layer using the fangs as a guide.

Glue black cat face into pllace
Scaredy Cat front section

Back It Up

For the back section of the Scaredy Cat, add a layer of glue to the orange/middle layer, align the holes and the edges, and stick it into place on top of the taupe/bottom layer. Then add the black/top layer.

Glue orange back section onto taupe layer and top off with black layer

Finish this section by centering the black leg piece to leave a small band of orange all around as an outline.

Glue black paw piece into place

Meet In The Middle

For the body, glue the layers together as for the previous sections, aligning the two holes.

Note: The taupe/bottom layer is an optional element for this middle section. To keep the weight consistent for each section, I opted to include it, but it can be omitted if desired.

Repeat with center section

Bring Your Scaredy Cat To Life

Bewitching Brads

Now that you have all of the parts assembled, all that’s left is to make it movable!

The simplest way to add joints to your Scaredy Cat is by using brads. There are oodles of colors and styles available, and no tools are required.

Simply align the holes, slip in the brad, flip the piece over, and open the prongs.

Secure layer sections with brads

The downside to brads is that they typically don’t hold very tightly, but they are the simplest and most cost-effective method.

Halloween Hitch Up

Another option is the hitch fastener. I love these, as they elevate the piece and give it a more upscale look. While these are pricier than the brads, they hold a bit tighter and come in a variety of colors.

Layer sections secured with optional hitch fasteners

Grommets Galore

The last option, the grommet, is my preferred because it is most like the original vintage cat die cuts.

For this method, you will need a grommet tool. I like the Memory Keepers Crop-A-Dile tool for this – however – this little kitty is a bit too deep for the original Crop-A-Dile to reach, so this project will require the Crop-A-Dile Big Bite.

Grommets and Crop-A-Dile

Both of these tools are a little on the pricey side, but I highly recommend them if you are planning to set grommets on the regular. These tools have a bit of a learning curve, but once you master them, setting grommets is so simple.

For this jointed specimen, I suggest clamping the Crop-A-Dile lightly onto the grommet. Just enough to secure it. Test the movement; then, if needed, clamp the grommet a bit tighter and test again. Keep tightening until you get the resistance you like.

Be aware that over-tightening will give you a jointed look, but the joints will be fixed and unable to pivot.

Align layers holes
Insert grommet
Fasten grommet with Crop-A-Dile

If grommet setting isn’t something you wish to add to your haunted resume, there is a more manual tool that normally comes in a kit with an assortment of grommets.

Manual grommet tool kit

This tool does take a bit of practice to master, so follow the instructions in your kit and test on scrap cardstock before trying it out on your Scaredy Cat.

The Eerie Details

To Punch Or Not To Punch

One element found in the vintage scaredy cat die cuts that I did not include is a hole for hanging. I wanted to leave this option open in case you have a different display method in mind.

If you do want to hang your Scaredy Cat, just use a small hole punch to make a hole near the top center of the body, and you’re good to go!

Last Looks

Frightful Feline

And there you have it – your very own spitting, snarling jointed cat, ready to keep watch over your Halloween haunts! Hang him in a window, perch him on a shelf, or let him guard your vintage display.

Vintage Inspired Jointed Scaredy Cat
Vintage Inspired Jointed Scaredy Cat
Vintage Inspired Jointed Scaredy Cat
Vintage-Inspired Jointed Scaredy Cat

Grab your template from our Hauntingly Yours shop and craft your own classic scaredy cat.

Until next time – happy haunting!

Free templates & patterns

130+ freebies are waiting in the Haunted Library

Templates, patterns and printables for every project on the blog.

Marsha
Your haunted host

Marsha

Counting down to Halloween since the 1970s. I create, style and celebrate all things costume and Halloween, all year round.

You May Also Like
About Me
Marsha

Hi, I’m Marsha

Welcome to my world of Halloween Ever After, where I create, style, and celebrate all things costume and Halloween.

Find Something Fun
Affiliate Disclosure

Within these haunted pages lie affiliate links to curious and captivating finds I love. If you make a purchase through them, I may earn a modest commission (think fun-size candy bar), which helps keep the Halloween magic alive. No extra cost to you – cross my batty heart.

Bearly Art Precision Craft Glue
A Making Make Believe favorite!
Buy Now
Bride and Groom Yarn Ghosts

I Do!

A Ghostly DIY

Make Me!

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Black vodka martini on a Halloween party tablescape

It's Official!

We're Haunt Friends

Check your email for the Haunted Library password.

 

Don’t miss a moment of the mischief.

Add hello@halloweeneverafter.com to your address book.

The magic happens right here in my studio and office. When you step inside my creative space, you’ll find an ever expanding gallery wall overflowing with original spooky art and classic Halloween LPs, right alongside a haunted cabinet packed to the brim with vintage curiosities.

It’s under the watchful eyes of these retro treasures that I design and craft.

We Have Room

For One More

Join us and get access to our Haunted Library stocked with templates, printables, cut files, and exclusive content. Plus, you’ll receive Eerie Emails just for our subscribers.

*Stay as long as you like. Unsubscribe at any time.