Where Halloween Lives Beyond October

Mini Witch Hat Headband – How To Make It

Mini Witch Hat Headband

Not a single leaf has fallen, pumpkin spice has not yet permeated every facet of daily life, and it’s still 90° plus outside. But that didn’t stop me from whipping up a mini witch hat headband to wear when I greet trick-or-treaters this Halloween.

Do you get a lot of trick-or-treaters at your house? We don’t. I think our record is 25. We live in a small subdivision near the edge of town, so there’s not much foot traffic. Our traffic is mostly due to my husband. He sends out a mass email at work asking people to bring their kiddos by so his wife can have a happy Halloween. He bribes them with the fact that the kids will receive the best candy and lots of it. (I love him!)

I try not to be too creepy as I don’t want anyone to cry when they come to our door, so I don’t normally dress in full costume. Usually, I wear a simple ensemble, Halloween t-shirt, spooky cute blinking necklace, jeans, etc. I try to keep a witch hat nearby to throw on to greet the ToTs, but often forget to put it on as I rush to the answer the door. 

While I don’t know what Halloween will look like in this post-Corona world, I want to be prepared in case we do have visitors. I decided to craft a mini witch hat headband that could double as a hat for a skull prop that sits on the front table. This little hat will be on display by the front door, making it easy for me to grab as I greet any trick-or-treaters. I think I’m going to call this wearable decor. Hmmm, maybe I’ll start a new trend?

I hope you enjoy crafting this mini witch hat headband. Be sure to tag me on Instagram or Facebook. I’d love to see what you create.

Materials:

  • Mini paper mache witch hat 
  • Decorative napkins or fabric
  • Glue sticks
  • Felt
  • Headband or hairpins
  • Stretchy hair ties
  • Embellishments (optional)

Tools:

  • Scissors
  • Mod Podge
  • Foam brush
  • Chalk or marking pencil
  • Glue gun
Tools and supplies for DIY Mini Witch Hat
Tools and supplies for DIY Mini Witch Hat

Before You Get Started:

I recommend reading through the entire tutorial before beginning.

If you use napkins for this project, separate the napkin ply so that you are left with only the top, decorative layer.

Before beginning, form napkin onto the witch hat and cut out the area that will fit around your cone base.  Allow for napkin to overhang brim so it can be turned under.

 It should look something like this:

Cut pattern for Mini Witch Hat Headband

You will need two, one for the back and one for the front.

Next, form napkin around the cone and cut a shape similar to this:

Cut pattern for Mini Witch Hat Headband

Steps:

Attach napkin with Mod Podge
Attach napkin with Mod Podge

1. Begin at the center back and apply a thin layer of Mod Podge to a small area of the brim.

Place your napkin up to the edge of the cone base. Working out towards the brim edge, gently smooth the napkin down. (Leave enough napkin to overhang the brim as we will tuck that under in Step 2.)

Continue around the brim making small snips in the napkin where necessary to allow it to form around the curve of the cone.

Tuck napkin under brim
Tuck napkin under brim
Snip and tuck edge under brim
Snip and tuck edge under brim
Brim completed
Brim completed

2. Once you’ve covered the top of the brim, trim the overhanging napkin to about 1″-2″ out from brim edge.

Make cuts in the overhang so that the napkin will fold over flat.

TIP: Don’t cut all the way to the brim edge. Leave about 1/8″ – 1/4″.

 Secure to the hat with a thin layer of Mod Podge.

Attach napkin to cone portion of hat
Attach napkin to cone portion of hat
Continue to attach napkin around hat
Continue to attach napkin around hat

3. Beginning at the back of the hat, lay a thin layer of Mod Podge from the cone base to the tip. Press and smooth napkin onto the hat.

Continue this process, working your way around the hat.

Allow to dry completely.

Mini Witch Hat Headband
Coat hat with Mod Podge

4. Once dry, coat entire hat with a thin layer of Mod Podge.

Let hat dry completely before moving to the next step.

Glue felt to underside of hat
Glue felt to underside of hat

5. Cut a circle from the felt that is approximately 1/4″ smaller than the diameter of the hat. 

Mark the center of the circle with a small dot of chalk.

Center felt onto underside of hat with your mark facing out and adhere with hot glue.

Cut slits in felt
Cut slits in felt

6. Starting at the center mark, cut to the inside edge of the hat. Repeat at quarter intervals so that you end up with four flaps.

Make a small slit for hair band
Make a small slit for hair tie

7. Make a slit, just large enough for the hair tie. This slit should be right up along the inside edge of the hat. Repeat on opposite side.

Secure hair band with hot glue
Secure hair tie with hot glue
Close up of hair tie
Close up of hair tie

8. Lift flap and secure hair ties to inner side of hat with hot glue.

Glue down all flaps.

Cut felt
Cut felt
Form felt into a cone
Form felt into a cone

9. Cut a piece of felt and form a cone.

Attach felt with hot glue
Attach felt with hot glue

10. Insert felt cone into hat and secure with hot glue.

Mini Witch Hat Headband
Slip headband into hair ties

11. To wear, insert headband into hair ties.

TIP: Don’t want to wear a headband? Slip bobby pins through the hair ties and secure to hair.

Mini Witch Hat Headband
Mini Witch Hat Wearable Decor

12. Embellish as desired. 

Now you have a piece you can wear or add to your haunting decor.

Notes: 

If you prefer a less formal look, tear your napkins or fabric into strips and apply in a random pattern. 

Adding ribbon embellishment around the cone base of the hat hides any imperfections. 

If you need to quickly custom color a satin headband for your hat see Fast Fix For A Boring Headband 

What We Used In This Demo: 

Paper Mache Witch Hat by Brother Sister Design Studio from Hobby Lobby 7.87″ x 7.87″ (5476163)

You can find a similar one at Factory Direct Crafts.

Holiday Inspirations Guest Towel napkins from JoAnn Fabrics (039938081515)

Craft felt from Hobby Lobby in Black (893818)

Scunci Elastic Hair Ties in Black from Target (043194321209)

Black Satin Headband from Hobby Lobby (409458) 

Embellishments include: tulle, novelty skull, craft gems and glitter spider.

Free templates & patterns

130+ freebies are waiting in the Haunted Library

Templates, patterns and printables for every project on the blog.

Marsha
Your haunted host

Marsha

Counting down to Halloween since the 1970s. I create, style and celebrate all things costume and Halloween, all year round.

You May Also Like
About Me
Marsha

Hi, I’m Marsha

Welcome to my world of Halloween Ever After, where I create, style, and celebrate all things costume and Halloween.

Find Something Fun
Affiliate Disclosure

Within these haunted pages lie affiliate links to curious and captivating finds I love. If you make a purchase through them, I may earn a modest commission (think fun-size candy bar), which helps keep the Halloween magic alive. No extra cost to you – cross my batty heart.

Bearly Art Precision Craft Glue
A Making Make Believe favorite!
Buy Now
Bride and Groom Yarn Ghosts

I Do!

A Ghostly DIY

Make Me!

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Black vodka martini on a Halloween party tablescape

It's Official!

We're Haunt Friends

Check your email for the Haunted Library password.

 

Don’t miss a moment of the mischief.

Add hello@halloweeneverafter.com to your address book.

The magic happens right here in my studio and office. When you step inside my creative space, you’ll find an ever expanding gallery wall overflowing with original spooky art and classic Halloween LPs, right alongside a haunted cabinet packed to the brim with vintage curiosities.

It’s under the watchful eyes of these retro treasures that I design and craft.

We Have Room

For One More

Join us and get access to our Haunted Library stocked with templates, printables, cut files, and exclusive content. Plus, you’ll receive Eerie Emails just for our subscribers.

*Stay as long as you like. Unsubscribe at any time.