Where Halloween Lives Beyond October

How to Make a DIY Bat Mask | 3 Ways + Free Template!

National Bat Appreciation Day Bat Masks
National Bat Appreciation Day Bat Masks

Nothing To Fear

The flittermouse. The flying fox. The bat. However you name it, this winged creature has etched out a permanent spot in the Halloween hall of fame – equal parts eerie and fascinating, with just enough mystery to keep us cautious.

Their connection to Halloween isn’t random. Seasonal bonfires and autumn gatherings historically drew clouds of insects, which naturally invited bats to the party. Over time, their nighttime habits and preference for shadowy hideouts helped cement their stature as one of the season’s most familiar Halloween icons.

Pop culture only deepened the intrigue. From gothic literature to classic horror films, bats became the icon of all things dark and dramatic, especially after the image of the vampire bat took hold in pop culture through the telling of Dracula.

But step outside the mysterious mood lighting for a moment, and bats tell a different story. They’re not villains – they’re vital. These small, fur-covered flyers play a major role in controlling insect populations (your summer self says thank you), and many species are surprisingly charming up close – more woodland creature than the fuel of nightmares.

Bat in tree

So today, in honor of National Bat Appreciation Day, we’re giving these misunderstood icons their due – a little less fear, a little more appreciation, and just the right amount of Halloween admiration, all wrapped up in a project that’s as effortless as it is eye-catching.

We’re keeping things simple and stylish with felt and paper, crafting quick bat masks that come together without fuss but still deliver on that unmistakable Halloween presence. They’re perfect as last-minute costume accents, party favors, or a small handmade surprise for the trick-or-treaters who appreciate a little extra flair.

Equal parts practical and playful, this is one of those projects that proves Halloween magic doesn’t have to be complicated to make an impact. If that sounds bat-tastic to you, then let’s get started.

Summon Up Supplies To Make A DIY Bat Mask

A Quick Raid of the Creepy Craft Cabinet

For this project, we will need a cutting machine or scissors plus:

Version I – Super Quick Felt
Craft felt square
Adhesive craft felt square
Fabric blade for cutting machine
Ribbon for ties

Version II – Quick Cardstock
Cardstock in two colors
Fine-point blade for cutting machine
Adhesive – I prefer a glue stick or double-sided tape roller for a fast fix
Ribbon for ties

Version III – Spirited Slow Stitch
Craft felt in two colors
Headnbond Ultra interfacing
Iron and ironing pad
Fabric and fine-point blades for cutting machine
Embroidery floss, beads, and a needle (optional embellishments)
Ribbon for ties

National Bat Appreciation Day Bat Mask

We will also need the National Bat Appreciation Day Mask from the Haunted Library. Select the SVG for machine cutting or the PDF for hand cutting.

Join the Haunted Library at Making Make Believe for Free Templates

Cut It Out

Pick Your Poison

Whether you prefer to cut your masks with a cutting machine like a Cricut or with scissors, this project comes together quickly and easily.

For hand cutting, download the PDF, print the template, cut it out, and trace it onto felt or cardstock. Then cut out your mask pieces.

For machine cutting, upload the SVG into your favorite design software, such as Cricut Design Space, and see the recommended mats, blades, and cut settings for each version below.

Version I – Super Quick Felt

Wicked Precision Cutting

Got a costume need that requires a fast fix? You can be flying high with this version of our National Bat Appreciation Day Mask.

To begin, cut the bat mask base from craft felt. I used the Fabric Grip mat, a Rotary Blade, and the Cricut Acrylic Felt setting to cut this piece.

National Bat Appreciation Day Bat Mask

To cut the bat mask top, place the adhesive felt onto a Fabric Grip or Strong Grip Mat with the adhesive side down. Select the Felt, Wool Bonded setting and cut using a Rotary Blade.

Note that only the bat mask top should be cut from adhesive felt.

Super quick felt bat mask

Startlingly Stuck

Peel the paper off the adhesive felt and, aligning the outer corners and base of the eye cutouts, stick it onto the base.

Adhesive felt bat mask option
Super quick felt bat mask

To finish this bat mask, skip to the Frightful Finish Line section below.

Version II – Quick Cardstock

Eerily Easy Prep

Got a costume emergency and no felt? No problem!

To begin, cut the top and base pieces for your bat mask, each from a different color of cardstock. I use a Standard Grip mat, Fine Point Blade, and the settings that match my cardstock weight (light, medium, or heavy).

National Bat Appreciation Day Bat Mask
Quick cardstock bat mask

Bat Building 101

Spread adhesive onto the back of the bat mask top and, aligning the outer corners and base of the eye cutouts, stick it onto the base.

Glue cardstock bat mask top to base
Quick cardstock bat mask

To finish this bat mask, skip to the Frightful Finish Line section below.

Version III – Spirited Slow Stitch

Bat Attitude

If time is not of the essence and you want to take this National Bat Appreciation Day Mask to the next level, try this version.

Cut the bat mask base from craft or wool felt using the Fabric Grip mat, a Rotary Blade, and the Cricut Acrylic Felt setting.

National Bat Appreciation Day Bat Mask

Haunted Heatnbond

For a sturdier mask, I like to add Headnbond Ultra interfacing between the layers.

Begin by setting your iron to medium heat with no steam, and cut a square of Heat ‘n Bond the size of your felt square.

Place the adhesive (rough) side of the Headnbond down onto the felt you want to use for the bat mask top and press for a few seconds.

If you are using acrylic craft felt instead of wool felt, it is best to keep the iron moving in a circular motion to prevent the fabric from melting.

Heatnbond for slow stitch bat mask

To cut your felt with the Heatnbond attached, place the felt on the Fabric Grip mat paper-side up. Use the Rotary Blade and the Felt, Wool Bonded setting.

Iron heatnbond to felt

An interfacing template is included in the download so you can embroider your mask prior to applying the Headnbond. The interfacing template piece is slightly smaller than the bat mask top, so you will have less bulk around the edges should you want to add any decorative stitching or other embellishments.

To cut the interfacing template, I placed the Heatnbond paper side down on a Standard Grip mat and. I used the Fine Point Blade, and the Light Cardstock settings.

Interfacing template option for slow stitch bat mask

To attach the pieces, remove the paper backing of the Headnbond.

Then, aligning the outer eye corners and the base of the eye cutouts, lay the top on the base and press again with the iron to adhere the pieces together.

Peel heatnbond paper

Dreadful Details

If you want to go one step further in celebrating, consider adding decorative embroidery, beading, or blanket stitching to your mask.

Slow stitch bat mask with blanket stitch

Frightful Finish Line

Brilliantly Batty

To finish your mask and make it wearable, attach a 17 – 19” length of ribbon to each side.

Options for attaching the ribbon include stitching it into place, installing grommets, or securing it with brads.

Ribbon ties for National Bat Appreciation Day Bat Masks

Celebrate!

Ready for the Night Shift

Now you are set to celebrate National Bat Appreciation Day in fang-tastic style!

National Bat Appreciation Day Super Quick Bat Mask
National Bat Appreciation Day Quick Cardstock Bat Mask
National Bat Appreciation Day Slow Stitch Bat Mask
National Bat Appreciation Day Bat Masks

Until next time – stay spooky.

Free templates & patterns

130+ freebies are waiting in the Haunted Library

Templates, patterns and printables for every project on the blog.

Marsha
Your haunted host

Marsha

Counting down to Halloween since the 1970s. I create, style and celebrate all things costume and Halloween, all year round.

You May Also Like
About Me
Marsha

Hi, I’m Marsha

Welcome to my world of Halloween Ever After, where I create, style, and celebrate all things costume and Halloween.

Find Something Fun
Affiliate Disclosure

Within these haunted pages lie affiliate links to curious and captivating finds I love. If you make a purchase through them, I may earn a modest commission (think fun-size candy bar), which helps keep the Halloween magic alive. No extra cost to you – cross my batty heart.

Bearly Art Precision Craft Glue
A Making Make Believe favorite!
Buy Now
Bride and Groom Yarn Ghosts

I Do!

A Ghostly DIY

Make Me!

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Black vodka martini on a Halloween party tablescape

It's Official!

We're Haunt Friends

Check your email for the Haunted Library password.

 

Don’t miss a moment of the mischief.

Add hello@halloweeneverafter.com to your address book.

The magic happens right here in my studio and office. When you step inside my creative space, you’ll find an ever expanding gallery wall overflowing with original spooky art and classic Halloween LPs, right alongside a haunted cabinet packed to the brim with vintage curiosities.

It’s under the watchful eyes of these retro treasures that I design and craft.

We Have Room

For One More

Join us and get access to our Haunted Library stocked with templates, printables, cut files, and exclusive content. Plus, you’ll receive Eerie Emails just for our subscribers.

*Stay as long as you like. Unsubscribe at any time.