
Spider Halloween Trick-or-Treat Bag
As an Amazon Associate I earn from qualifying purchases.
This post may contain affiliate links for your convenience. Click here to read our disclosure policy.
One of my favorite Halloween decorating methods involves webbing – lots and lots of webbing.
Spreading webs across our front porch is my quick and easy way to up the spooky factor and give little tots pause before they venture underneath them to retrieve a treat.

The webs are ominous enough for most littles, so much so that I can get by with only a couple of spiders or forgo them altogether.
But who puts out webs without spiders?
Not I. I always make sure to perch our largest specimen on a bush. There, he is more easily seen upon exit, causing many kiddos to veer wide around him while others stop to pet him.
If you have a fan of the eight-legged beastie on your Halloween list, this project is for you.
This boo bag is our second in a series of trick-or-treat sacks and features a not-too-scary spider – the perfect companion for Halloween candy acquisition.
A Material Minute
Before we begin, here are a few quick notes about the materials for this project.
The material list calls for a 2 mm craft felt. This is thicker than standard craft felt sheets, making your trick-or-treat sack more sturdy.
Since this material is thicker it may require a bit more patience when machine sewing.
To add even more durability to your bag, you can cut a piece of heavy cardstock or thin cardboard and place it in the bottom.
I list specific colors for the trick-or-treat sack, but feel free to experiment with your spider, such as substituting googly eyes for felt eyes or swapping out the black felt for a fun color.
Lastly, this project can be machine or hand-stitched. While hand sewing will take a bit longer, it may be easier than navigating a sewing machine into tight spaces of bulky felt.
Ok, let’s get started.
Let’s Make A Trick-Or-Treat Bag
For this project, we will need:
4 sheets of 9″ x 12″ 2mm craft felt in black
1 sheet of 9″ x 12″ 2mm craft felt in grey
Scrap piece of white or ivory craft felt
Scrap piece of black craft felt
16-17″ piece of belting trim
Scissors or cutting machine with fabric blade – I use the Cricut Maker
Adhesive – I like Beacon Felt Glue
Sewing machine and thread
Straight pins or clips (not shown)

We will also need the Spider Boo Bag template from the Haunted Library. Choose the PDF file to hand cut or the SVG file for machine cutting.

Spinning The Web
To begin, if machine cutting, upload the Boo Bag template into your design software, such as Cricut Design Space.

To cut by hand, open the PDF template using your favorite PDF reader (Adobe, FoxIt, etc.).
Print your template, ensuring the pages are set to print at Actual Size. The base piece will exceed the print area, so select the Poster option under Page & Size Handling.


Cut two of the spider base, two sides, and one bottom from the black 2mm felt.
Cut two of the spider legs pieces from the gray craft felt.
Cut the eyeball pieces from the white craft felt and the pupils from the black.
She’s Got Legs
To assemble, glue or stitch each eyeball together by placing the black circle onto the white circle.
Glue the eyeballs onto the front (base piece) of the spider.


Next, position the spider legs along the front base piece the side and glue them into place.

Assembling An Arachnid
To assemble, stack the front onto the bottom and stitch together using a 1/4″ seam allowance. (The seam will be to the outside.)



Next, stack the back onto the bottom and stitch together.


Mark the center of the bottom and one side and align the pieces.
When the centers are aligned, there will be 1/4″ of felt on each side that overhangs the bottom seams.


Stitch the side and bottom pieces together, beginning at the seam and leaving the 1/4″ overhang at both ends.

Demo shown on a grey felt to make it easier to see.
When the side is attached to the bottom, it should look like this:


Repeat for the opposite side.

Pin or clip the side piece to the front and stitch from the bottom to the top.


Next, clip the side piece to the back and stitch from the bottom to the top.
Repeat for the opposite side.

How To Handle Your Spider
Lastly, prepare the handle by trimming the ends of the belting trim and carefully heating them to avoid fraying.

Pin the belting to the center of each side of the bag.

Stitch down, across, up, and over to form a square, then reinforce the union by stitching an “X” in the center.
Repeat this two to three times to ensure the handle is well attached.

Demo shown on a grey felt to make it easier to see.
Cute Creepy Crawlie
This trick-or-treat bag is ready for Halloween!




This bag is the second creation from our ghoulish group of trick-or-treating sacks.
Check back to see which character is up next, and, in the meantime, check out the Mummy Boo Bag.
Until next time – stay spooky.


