
Halloween Trick Or Treat Bag – Mummy Version
As an Amazon Associate I earn from qualifying purchases.
This post may contain affiliate links for your convenience. Click here to read our disclosure policy.
Trick or Treat
Smell my feet
Give me something good to eat
Growing up in middle America in the 70s, our Halloween celebrations were fun but simple.
We had a school party complete with a “Room Mother” bringing in festive holiday treats such as cupcakes or cookies, a costume parade, and a few party games.
Of course, the pièce de résistance was after school and the act of trick or treating.
Traveling from house to house, toting a Jack-O-Lantern candy bucket (or pillowcase, if you were feeling extra optimistic) to load up with candies and treats galore, was a night to behold.
I have fond memories of these grinning treat buckets, and we’ve accumulated a small collection of them, which we use to decorate for the season.

Today’s kiddos can still use a pumpkin pail for candy procurement or select a bag, sack, or other vessel that complements their costume.
While I love the traditional Jacks, I also love options, so today, we will whip up a super-cute trick or treat bag – mummy style.
This character bag is perfect for candy collecting or to BOO the neighbors, ie. You’ve Been Boo’d.
And, even though I like the super spooky, I kept this trick or treat sack toddler-friendly.
Give Me A Minute, Mummy
Before we begin, I want to note a few things about the materials for this project.
The material list calls for a 2 mm craft felt, which is thicker than standard craft felt sheets and will make your trick or treat sack more sturdy.
Since this material is thicker, machine sewing may take a bit more patience.
If you wish to add even more durability to your bag, cut a piece of heavy cardstock or thin cardboard and place in the bottom.
I list specific colors for the trick or treat sack, but feel free to experiment with your mummy. You can even substitute gauze or muslin for the mummy wrap and googly eyes for the felt eyes.
Finally, this project can be machine or hand-stitched. While hand sewing may take a bit longer, it may be easier than navigating tight spaces with bulky felt.
Ok, let’s get started.
Let’s Make A Trick Or Treat Bag
For this project, we will need:
4 sheets of 9″ x 12″ 2mm craft felt
1-2 sheets of 9″ x 12″ white craft felt
Scrap piece of black craft felt
16-17″ piece of belting trim
Scissors or cutting machine with fabric blade – I use the Cricut Maker
Adhesive – I like Beacon Felt Glue
Sewing machine and thread
Straight pins or clips (not shown)

We will also need the Mummy Boo Bag template from the Haunted Library. Choose the PDF file to hand cut or the SVG file for machine cutting.

Parts & Pieces
To begin, if machine cutting, upload the Boo Bag template into your design software, such as Cricut Design Space.

To cut by hand, open the PDF template using your favorite PDF reader (Adobe, FoxIt, etc.).
Print your template ensuring that the pages are set to print at Actual Size. The base piece will exceed the print area so select the Poster option under Page & Size Handling.


Cut two of the mummy base, two sides, and one bottom from the grey 2mm felt.
From the white craft felt cut the mummy wrappings and the large and small eyeball pieces.
Lastly, cut the medium eyeball piece from black craft felt.

Mummy In The Making
To assemble, glue or stitch each eyeball together by placing the small white circle onto the black circle and then putting them onto the large white circle.


Layout the mummy wrappings and eyes on the base.
Each wrapping is different, so to determine where it fits on the mummy base, a diagram is included with the template.

Glue or stitch the eyes and wrappings into place.


Wrap It Up
To assemble, stack the front onto the bottom and stitch together using a 1/4″ seam allowance. (The seam will be to the outside.)



Next, stack the back onto the bottom and stitch together.


Mark the center of the bottom and one side and align the pieces.
When the centers are aligned, there will be 1/4″ of felt on each side that overhangs the bottom seams.


Beginning at the seam, stitch the side and bottom pieces together, leaving the 1/4″ overhang at both ends.

When the side is attached to the bottom it should look like this:


Repeat for the opposite side.

Pin or clip the side piece to the front and stitch from the bottom to the top.


Next, clip the side piece to the back and stitch from the bottom to the top.
Repeat for the opposite side.

Get A Handle On Your Mummy
Lastly, prepare the handle by trimming the ends of the belting trim and carefully heating them to avoid fraying.

Pin the belting to the center of each side of the bag.

Stitch down, across, up, and over to form a square, then reinforce the union by stitching an “X” in the center.
Repeat this two to three times to ensure the handle is well attached.

The Mummy – It Lives!
This trick or treat bag is ready for Halloween!



As usual, I couldn’t make just one, so I crafted a ghoulish group of trick or treat sacks.
The series will launch one-by-one over the upcoming weeks, so be sure to check back.
Until next time – stay spooky.


